TenTec
[Top] [All Lists]

Re: [TenTec] Omni VI 1st IF Narrow CW Filter Enable?

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Omni VI 1st IF Narrow CW Filter Enable?
From: Barry N1EU <barry.n1eu@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 23 Jan 2011 11:28:38 +0000
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
On Sun, Jan 23, 2011 at 5:17 AM, Don Jones <ko7i@comcast.net> wrote:

> I am thinking the jumper switch next to the "optional filter" slot is the
> key. The jumper shorts two of the three posts together. How should that
> jumper be configured when I have a optional filter installed?
>

For your 400hz filter, follow the instructions for the TT 217 filter
installation: the jumper should be in the "HI" gain position, shorting the
left and center pins.

73, Barry N1EU
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>