TenTec
[Top] [All Lists]

Re: [TenTec] Orion II transmit equalization

To: tentec@contesting.com
Subject: Re: [TenTec] Orion II transmit equalization
From: "Dr. Gerald N. Johnson" <geraldj@weather.net>
Reply-to: geraldj@weather.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 21 Feb 2011 23:41:36 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
The fine Orion II manual says:
> Carrier amplitude for AM operation is set
> automatically by ORION II. The PWR
> control on the front is used for PEP output
> power setting in AM operation. A value of
> 100 would correspond to 100 watts PEP AM
> output, or 25 watts carrier power maximum.

Page 42 version 4. Left column under the header:
SETTING UP ORION II FOR AM
TRANSMIT

Looks like its presolved.

73, Jerry, K0CQ

On 2/21/2011 4:30 PM, kc9cdt@aol.com wrote:
> OK, so set the power 100 is fine?
> I thought I might have to set it at 25.
> 73,
> Lee
>
>>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>