Many thanks for the replies gentlemen. I think I can see where I was going
wrong, all very helpful.
Tnx agn.
John de VK2XGJ
Life is like a hot bath, the longer you're in it,
the more wrinkled you become.
-----Original Message-----
From: Rsoifer@aol.com
Sent: Saturday, September 17, 2011 3:04 AM
To: tentec@contesting.com
Subject: Re: [TenTec] OII VOX settings
FWIW, my VOX settings for the 707 mic are VOX trip level 5%, ANTI-VOX 20%
and VOX hang 0.60.
73 Ray W2RS
In a message dated 9/16/2011 4:56:13 P.M. GMT Standard Time,
natan1945@gmail.com writes:
John,
I use the same radio and headset as you do. The "VOX" settings I use are:
VOX Trip level 7%
ANTI-VOX Level is 20%
VOXHang is 0.40 sec.
However, those are tailored for CW since I use a foot switch for the little
voice operation I do. I suspect the type of cartridge used affects the
settings too. My numbers are for a HC-5 unit. Heil now makes three
elements for the headset so if you are using anything other than the HC-5,
the numbers might be off a bit, however, the numbers I gave you should get
you close.
Good Luck,
Natan W6XR/2
Freeville, NY
On Fri, Sep 16, 2011 at 3:39 AM, John Simon <jrsimon@ozemail.com.au> wrote:
> I've just acquired a Heil Proset 5 headset for my Orion 566 and not
being
> used to the VOX operation I was wondering what settings other users have
on
> their OII's.
>
>
>
>
> John de VK2XGJ
> Life is like a hot bath, the longer you're in it,
> the more wrinkled you become.
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|