I hung my DVM off the 200uA meter plug and it is completely within specs.
Fully adjustable and it seems to be working. So it looks like the Korean made
229A meter has failed.
I'll have to do some thinking on a replacement.
Thanks for the bandwidth.
73,
Rick
VE7TK
Website: http://www.ve7tk.com
>________________________________
> From: Rick W <ve7tk@yahoo.ca>
>To: Ten-Tec Reflector <tentec@contesting.com>
>Sent: Sunday, July 1, 2012 8:39:29 AM
>Subject: 229A SWR Circuit
>
>
>I have recently acquired a 229A tuner. It needed a few repairs - mainly
>mechanical - but otherwise seems in good shape. I've replaced the dial
>elastic cord and it tunes smoothly and consistently.
>
>
>I am having a problem with the SWR / Power measurement circuitry. I can't get
>the meter to full scale and power measurements are way off. Calibration is
>impossible.
>
>
>The meter is moving - albeit nowhere near the correct deflection.
>
>
>My guess is that the SWR circuit in the 229A is similar to the current 238.
> Is there any history of problems with this circuit. Any reports of:
> 1. meter movement failure;
> 2. leaky capacitors; or
> 3. open or out of tolerence resistors?
> This is a pretty simple circuit and virtually all the parts (less the meter)
>are likely in my junk box. If there's a history of a part failure I'd like to
>start there.
>
>
>Thanks.
>
>
>73,
>Rick
>VE7TK
>
>
>Website: http://www.ve7tk.com
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|