TenTec
[Top] [All Lists]

Re: [TenTec] Trying to save a Paragon, help!

To: <tentec@contesting.com>
Subject: Re: [TenTec] Trying to save a Paragon, help!
From: "Vic Klein" <vhklein@ptd.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 5 Jan 2013 08:39:09 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I suspect the connections between the front panel and the main board are an
issue. Try reseating those white cable connectors at both ends and see if
you get a better response from the controls. Everything should work while
the power is on, even without a 9v battery as that just maintains things
when power is off. 

=Vic=
WA4THR

----------------------------------------------------------------------------
------------------------------
To:     Ten Tec List <tentec@contesting.com>
Subject:        [TenTec] Trying to save a Paragon, help!
From:   Steve Mercure <w5en@hotmail.com>
Reply-to:       Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date:   Wed, 2 Jan 2013 21:57:07 -0600
List-post:      <tentec@contesting.com">mailto:tentec@contesting.com>

A non-ham coworker was recently given some ham gear because he works at a
radio 
station.  This gear included a Ten Tec Paragon that I am attempting to get 
working, with little luck.  I have a couple of questions of the list of
things 
to try before I recommend that he send it to the factory. When turned on the

radio comes on in different modes on the display and I can not change any of

the modes from the front panel.  The previous owner, now SK was an obvious 
smoker.  So far I have tried:
Removing the 3 plug in cards and cleaning their connections to the bus.  
I have tried resetting the radio using the red button on the side with no
luck.
I currently have the 9v battery removed and will put in a replacement and
try 
the reset again. 
I've heard there is another type of reset that might be worth trying?  Any 
ideas along this line would certainly help!  Second question, does this
radio 
require the 9v battery for the frequency and date/time display work? 
If it were mine it would already be boxed up and on its way back to
Tennessee.  
However, this belongs to another person and I would like to try everything 
before I recommend it go out. 
Contact me directly if you wish: w5en at hotmail dot com
73 de W5EN Steve                                          

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>