TenTec
[Top] [All Lists]

Re: [TenTec] replacement speaker for 961/962 power supply?

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] replacement speaker for 961/962 power supply?
From: "Mike Hyder -N4NT-" <Mike_N4NT@charter.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 9 Jan 2013 20:06:53 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Suggest you look in your supply at the speaker and take its measurements. Then I'd go to that Jameco site and find one that fits. You can go other places, perhaps but I do know the quality of the speaker elements I bought from Jameco and it was excellent.
73, Mike N4NT

----- Original Message ----- From: "Allan Taylor" <k7gt.cw@gmail.com>
To: <tentec@contesting.com>
Sent: Wednesday, January 09, 2013 11:40
Subject: [TenTec] replacement speaker for 961/962 power supply?


A thread of late concerns replacement speakers for older TT transceivers.
It seems a perfect
fit has been found. I need to replace the speaker in one of my TT power
supplies (either a 961
or 962, haven't looked on back lately!). Will the speaker spec'd below fit
in the power supply?
Has anyone replaced the speaker in a 961/962?

Regards

Allan K7GT


Message: 12
Date: Sat, 5 Jan 2013 18:33:13 -0500
From: "Mike Hyder  -N4NT-" <Mike_N4NT@charter.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>,
        <barry.n1eu@gmail.com>
Subject: Re: [TenTec] Replacement Speakers for Older TenTec
        Transceivers.
Message-ID: <0681EC85F4684CB8B1D8C6D859F87D25@dell8300>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
        reply-type=original

I think I put one in the Corsair II but I've since lost it and cannot tell
you. The new speaker with the other rigs I mentioned mounts inside the
cabinet and the mounting holes mate up with the screw holes in the square
external cover - best I remember from 2003. I put them in at the suggestion
of a fellow on this reflector who said they were of stouter quality and
improved the sound of the rig and they surely did do that and were a
perfect
fit..

Mike N4NT

----- Original Message -----
From: "Barry N1EU" <barry.n1eu@gmail.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Friday, January 04, 2013 17:22
Subject: Re: [TenTec] Replacement Speakers for Older TenTec Transceivers.


> Mike, the Jameco speaker actually screws right in where the old Corsair
II
> speaker was without modification/drilling/adapting?  If so, that's
> amazing.
>
> Tnx/73,
> Barry N1EU
>
> On Thu, Jan 3, 2013 at 11:48 AM, Mike Hyder -N4NT-
> <Mike_N4NT@charter.net>wrote:
>
>> OK. Here's the skinny on the Jameco speakers, straight from a Jameco
>> rep's
>> mouth. The model 99995 which I purchased six of back in 2003 has been
>> replaced by the Jameco model 99996. The only difference between the
older
>> and newer models is that the 99996 now available is "RoHS compliant,"
>> which
>> means that it is free of lead (for any of you speaker eaters). I can >> now
>> heartily recommend the Jameco model 99996 speaker as a direct
replacement
>> for the original internal speakers in older Ten-Tec rigs. I have put
them
>> in Tritons, Omni-C's, 580 Deltas and a Corsair II.
>>
>> Here again is the link to the speaker >
<
http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_99996_-1?CID=PDF
Sorry for the confusion but the 5 did look exactly like a 6 on my speaker.
73,




_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>