TenTec
[Top] [All Lists]

Re: [TenTec] DAYLIGHT SAVING TIME FOR TEN-TEC NETS TODAY

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] DAYLIGHT SAVING TIME FOR TEN-TEC NETS TODAY
From: "Eric Zust - W0TT" <w0tt@charter.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 10 Mar 2013 10:25:35 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
John,

   I believe that you have an error in the time specified in your E-mail.

   3:00 pm EDT equals 1900 UTC.

V/R,

Eric - W0TT

-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of John
Occhipinti
Sent: Sunday, March 10, 2013 9:51 AM
To: tentec@mailman.qth.net; tentec@contesting.com;
TenTec_539@yahoogroups.com; TenTec@yahoogroups.com;
TenTec_Eagle@yahoogroups.com; Ten-Tec-Omni-VII@yahoogroups.com
Subject: [TenTec] DAYLIGHT SAVING TIME FOR TEN-TEC NETS TODAY

Daylight Saving Time is here and the TEN-TEC 40 meter net starts today at
20:00 UTC (3 PM Eastern Daylight Saving Time) on or about 7.260 LSB and the
20 meter net follows at 21:00 UTC on or about 14.325 USB. 

Many will be reaching and/or surpassing their number of checkins to qualify
them for their first TEN-TEC Certificate. For the newer folk who are not
aware of the program that was instituted by Jim Wharton NO4A, Vice President
TEN-TEC Inc. in January, just click on this link to my QRZ page and you will
see all of the details and also a picture of the TEN-TEC Cerfificate.
http://www.qrz.com/db/k3ur

I would appreciate if several people could secure these frequencies prior to
net times. Thank you.

John D. Occhipinti, K3UR
Net Control, TEN-TEC SSB Nets
http://k3ur.com
The Voice of Atlanta
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>