Hi Carl-
Yes, same "freq off by 1.5Mhz" when switching band with a click on the band
button, or by moving slider.
73 de Dave. K1OPQ/4
Sent from my iPhone
> On Feb 16, 2015, at 12:00 PM, tentec-request@contesting.com wrote:
>
> Send TenTec mailing list submissions to
> tentec@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.contesting.com/mailman/listinfo/tentec
> or, via email, send a message with subject or body 'help' to
> tentec-request@contesting.com
>
> You can reach the person managing the list at
> tentec-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TenTec digest..."
>
>
> Today's Topics:
>
> 1. Re: jupiter firmware (Al Sirois)
> 2. Re: jupiter firmware (chuck adams)
> 3. Re: jupiter firmware (Clayton Brantley via TenTec)
> 4. Re: jupiter firmware (Mike Bryce)
> 5. Re: jupiter firmware (Mike Bryce)
> 6. Re: jupiter firmware (Fernando)
> 7. Re: jupiter firmware (Clayton Brantley via TenTec)
> 8. EAGLE and N4PY software issue (David Perrin)
> 9. Fwd: EAGLE and N4PY software issue (David Perrin)
> 10. Re: EAGLE and N4PY software issue (Carl Moreschi)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 15 Feb 2015 12:13:05 -0500
> From: "Al Sirois" <alsirois@roadrunner.com>
> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> Subject: Re: [TenTec] jupiter firmware
> Message-ID: <2C74001297434509B07EC303D24345A3@officepc>
> Content-Type: text/plain; format=flowed; charset="utf-8";
> reply-type=original
>
> One has to be FAST with pencil waiting. Re-Start-up a 2/nd time to finish
> that was missed.
> N1MHC@arrl.net
> ===============
>
> -----Original Message-----
> From: Mike Bryce
> Sent: Sunday, February 15, 2015 11:31 AM
> To: Discussion of Ten-Tec Equipment
> Subject: [TenTec] jupiter firmware
>
> Gang?
>
> simple question
>
> how do you display what firmware a jupiter is running?
>
> I know there is a splash screen at startup, but it?s really fast.
>
> I can?t remember what button to press to display the firmware
>
> thanks
>
>
> Mike Bryce, WB8VGE
> the heathkit shop
> SunLight energy systems
> J e e p
> o|||||||o
>
>
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 15 Feb 2015 10:20:04 -0700
> From: chuck adams <chuck.adams.k7qo@gmail.com>
> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Subject: Re: [TenTec] jupiter firmware
> Message-ID: <54E0D544.5070403@gmail.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
>
>
> Let's see now. It's the 21st century. You all own an iPhone and
> an iPad and maybe even a HD movie camera....
>
> How about a snippet of recording using any or all of the above
> devices and replay frame by frame?
>
> chuck, k7qo
>
>> On 02/15/2015 10:13 AM, Al Sirois wrote:
>> One has to be FAST with pencil waiting. Re-Start-up a 2/nd time to
>> finish that was missed.
>> N1MHC@arrl.net
>> ===============
>>
>> -----Original Message----- From: Mike Bryce
>> Sent: Sunday, February 15, 2015 11:31 AM
>> To: Discussion of Ten-Tec Equipment
>> Subject: [TenTec] jupiter firmware
>>
>> Gang?
>>
>> simple question
>>
>> how do you display what firmware a jupiter is running?
>>
>> I know there is a splash screen at startup, but it?s really fast.
>>
>> I can?t remember what button to press to display the firmware
>>
>> thanks
>>
>>
>> Mike Bryce, WB8VGE
>> the heathkit shop
>> SunLight energy systems
>> J e e p
>> o|||||||o
>>
>>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sun, 15 Feb 2015 17:41:15 +0000 (UTC)
> From: Clayton Brantley via TenTec <tentec@contesting.com>
> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Subject: Re: [TenTec] jupiter firmware
> Message-ID:
> <1340903301.6032190.1424022075619.JavaMail.yahoo@mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
> The answer in in the manual.? I sold my Jupiter and no longer have the book.?
> I did read about that once.
> Clayton N4EV
>
> From: Mike Bryce <prosolar@sssnet.com>
> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Sent: Sunday, February 15, 2015 11:31 AM
> Subject: [TenTec] jupiter firmware
>
> Gang?
>
> simple question
>
> how do you display what firmware a jupiter is running?
>
> I know there is a splash screen at startup, but it?s really fast.
>
> I can?t remember what button to press to display the firmware
>
> thanks
>
>
> Mike Bryce, WB8VGE
> the heathkit shop
> SunLight energy systems
> J e e p
> o|||||||o
>
>
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Sun, 15 Feb 2015 12:59:28 -0500
> From: Mike Bryce <prosolar@sssnet.com>
> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Subject: Re: [TenTec] jupiter firmware
> Message-ID: <01CDED96-ACEE-4FB0-9326-34CEC8E2EAEF@sssnet.com>
> Content-Type: text/plain; charset=utf-8
>
> you?re right!
>
> it is the 21st century.
>
> on shouldn?t have to stand on one?s head to do a simple thing like finding
> out what version of firmware is running on a Ten Tec Jupiter.
>
>
> Mike, WB8VGE
> SunLight Energy Systems
> The Heathkit Shop
> http://www.theheathkitshop.com/ <http://www.theheathkitshop.com/>
> J e e p
> o|||||||o
>
> A man with one clock knows what time it is. A man with two clocks is never
> sure.
>
>
>
>> On Feb 15, 2015, at 12:20 PM, chuck adams <chuck.adams.k7qo@gmail.com> wrote:
>>
>>
>>
>> Let's see now. It's the 21st century. You all own an iPhone and
>> an iPad and maybe even a HD movie camera....
>>
>> How about a snippet of recording using any or all of the above
>> devices and replay frame by frame?
>>
>> chuck, k7qo
>>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Sun, 15 Feb 2015 13:00:24 -0500
> From: Mike Bryce <prosolar@sssnet.com>
> To: Clayton Brantley <clayton_n4ev@yahoo.com>, Discussion of Ten-Tec
> Equipment <tentec@contesting.com>
> Subject: Re: [TenTec] jupiter firmware
> Message-ID: <3E8000E9-2992-40A6-A591-63637075A9F5@sssnet.com>
> Content-Type: text/plain; charset=utf-8
>
> I looked. Couldn?t see it anyplace. Even went to the ten tec wiki?
>
>
> Mike Bryce
> prosolar@sssnet.com
>
>
>
>> On Feb 15, 2015, at 12:41 PM, Clayton Brantley via TenTec
>> <tentec@contesting.com> wrote:
>>
>> The answer in in the manual. I sold my Jupiter and no longer have the book.
>> I did read about that once.
>> Clayton N4EV
>>
>>
>
>
> ------------------------------
>
> Message: 6
> Date: Sun, 15 Feb 2015 10:01:21 -0800
> From: Fernando <n2fq@sbcglobal.net>
> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Subject: Re: [TenTec] jupiter firmware
> Message-ID: <B0889AFA-3FD1-4E51-8F27-37DEFA32122A@sbcglobal.net>
> Content-Type: text/plain; charset=utf-8
>
> ALT -> STEP and release.
> Fernando N2FQ/6
> n2fq@sbcglobal.net
>
>
>
>
>> On Feb 15, 2015, at 8:31 AM, Mike Bryce <prosolar@sssnet.com> wrote:
>>
>> Gang?
>>
>> simple question
>>
>> how do you display what firmware a jupiter is running?
>>
>> I know there is a splash screen at startup, but it?s really fast.
>>
>> I can?t remember what button to press to display the firmware
>>
>> thanks
>>
>>
>> Mike Bryce, WB8VGE
>> the heathkit shop
>> SunLight energy systems
>> J e e p
>> o|||||||o
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
> ------------------------------
>
> Message: 7
> Date: Sun, 15 Feb 2015 19:12:09 +0000 (UTC)
> From: Clayton Brantley via TenTec <tentec@contesting.com>
> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Subject: Re: [TenTec] jupiter firmware
> Message-ID:
> <1764545618.6122742.1424027529566.JavaMail.yahoo@mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
> Mike:? Think Fernando hit it on the head!
>
> Hope that works.Clayton N4EV
> From: Fernando <n2fq@sbcglobal.net>
> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Sent: Sunday, February 15, 2015 1:01 PM
> Subject: Re: [TenTec] jupiter firmware
>
> ALT -> STEP and release.
> Fernando N2FQ/6
> n2fq@sbcglobal.net
>
>
>
>
>> On Feb 15, 2015, at 8:31 AM, Mike Bryce <prosolar@sssnet.com> wrote:
>>
>> Gang?
>>
>> simple question
>>
>> how do you display what firmware a jupiter is running?
>>
>> I know there is a splash screen at startup, but it?s really fast.
>>
>> I can?t remember what button to press to display the firmware
>>
>> thanks
>>
>>
>> Mike Bryce, WB8VGE
>> the heathkit shop
>> SunLight energy systems
>> J e e p
>> o|||||||o
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
>
> ------------------------------
>
> Message: 8
> Date: Sun, 15 Feb 2015 21:04:51 -0500
> From: David Perrin <dbperrin@gmail.com>
> To: Tentec reflector <tentec@contesting.com>
> Subject: [TenTec] EAGLE and N4PY software issue
> Message-ID: <E3F5E574-AD93-45A3-B3C9-53BA6C2608B3@gmail.com>
> Content-Type: text/plain; charset=utf-8
>
> Hi-
> I have my older EAGLE connected to my Toshiba notebook (no serial ports)
> with a USB cable and the COM (UART) is at com12. I get pretty good
> communication between the computer and the EAGLE, but one problem persists.
> The software misses the frequency of the EAGLE by 1.5MHz. Many times I
> have set the frequency of the EAGLE to 10MHz and the software to 10MHz, and I
> have fine tuned both to get the same pitch on both USB and LSB, I have set
> A=B to both VFO?s, I have run the Calibrate routine. It all looks the same on
> the software and the EAGLE.
> As soon as I try to change the frequency of the software by sliding the
> tuner dial the EAGLE jumps frequency by 1.5 MHz to 8.5MHz.
> What is up with that? Any ideas?
>
> 73 de Dave, K1OPQ/4
>
> ------------------------------
>
> Message: 9
> Date: Sun, 15 Feb 2015 21:07:27 -0500
> From: David Perrin <dbperrin@gmail.com>
> To: Tentec reflector <tentec@contesting.com>
> Subject: [TenTec] Fwd: EAGLE and N4PY software issue
> Message-ID: <F1917C10-3CE6-4333-85C3-E07A421356DE@gmail.com>
> Content-Type: text/plain; charset=utf-8
>
> My apologies if this is a repeat:
>
>> Begin forwarded message:
>>
>> Subject: EAGLE and N4PY software issue
>> From: David Perrin <dbperrin@gmail.com>
>> Date: February 15, 2015 at 9:04:21 PM EST
>> To: Tentec reflector <tentec@contesting.com>
>>
>> Hi-
>> I have my older EAGLE connected to my Toshiba notebook (no serial ports)
>> with a USB cable and the COM (UART) is at com12. I get pretty good
>> communication between the computer and the EAGLE, but one problem persists.
>> The software misses the frequency of the EAGLE by 1.5MHz. Many times I
>> have set the frequency of the EAGLE to 10MHz and the software to 10MHz, and
>> I have fine tuned both to get the same pitch on both USB and LSB, I have A=B
>> to both VFO?s, I have run the Calibrate routine. It all looks the same on
>> the software and the EAGLE.
>> As soon as I try to change the frequency of the software by sliding the
>> tuner dial the EAGLE jumps frequency by 1.5 MHz to 8.5MHz.
>> What is up with that? Any ideas?
>>
>> 73 de Dave, K1OPQ/4
>
>
>
> ------------------------------
>
> Message: 10
> Date: Mon, 16 Feb 2015 08:41:57 -0500
> From: Carl Moreschi <n4py3@earthlink.net>
> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Subject: Re: [TenTec] EAGLE and N4PY software issue
> Message-ID: <54E1F3A5.3090500@earthlink.net>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> I will get back home on Feb 22 and I will test it out then to see if I
> can reproduce your results. But does this happen if you don't use the
> frequency scale slider and instead use the band buttons to change frequency.
>
>
> Carl Moreschi N4PY
> 58 Hogwood Rd
> Louisburg, NC 27549
> www.n4py.com
>
>> On 2/15/2015 9:04 PM, David Perrin wrote:
>> Hi-
>> I have my older EAGLE connected to my Toshiba notebook (no serial ports)
>> with a USB cable and the COM (UART) is at com12. I get pretty good
>> communication between the computer and the EAGLE, but one problem persists.
>> The software misses the frequency of the EAGLE by 1.5MHz. Many times I
>> have set the frequency of the EAGLE to 10MHz and the software to 10MHz, and
>> I have fine tuned both to get the same pitch on both USB and LSB, I have set
>> A=B to both VFO?s, I have run the Calibrate routine. It all looks the same
>> on the software and the EAGLE.
>> As soon as I try to change the frequency of the software by sliding the
>> tuner dial the EAGLE jumps frequency by 1.5 MHz to 8.5MHz.
>> What is up with that? Any ideas?
>>
>> 73 de Dave, K1OPQ/4
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> ------------------------------
>
> End of TenTec Digest, Vol 146, Issue 15
> ***************************************
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|