TenTec
[Top] [All Lists]

Re: [TenTec] RFI into Orion II

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] RFI into Orion II
From: Jim Brown <k9yc@audiosystemsgroup.com>
Reply-to: k9yc@arrl.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 21 Feb 2016 19:54:20 -0800
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Hi Gary,

Oh, I'm well aware of the ravings of the audiophools and the carnival barkers who extract money from them -- they were routinely the topic of considerable merriment when we gathered in the bar at meetings of professional audio societies (I'm a Fellow of the AES and an emeritus member of the Acoustical Society of America).

Bob, K4TAX, is also retired from the world of pro audio.

73, Jim K9YC

On Sun,2/21/2016 7:39 PM, Gary J FollettDukes HiFi wrote:

I just visited your page and find it very eye opening.

While I was aware of the effects to which you refer in your article on “Transmission Lines at Audio Frequencies”, I had not seen the actual plots of the responses before.

I am sure you are aware, but lots of sellers of very expensive audio cables exploit the effects to which you refer, effects that are negligible (as you state) at cable lengths less than 500 feet. These sellers contend the these effects can be heard at 10 foot lengths and claim to have somehow compensated for these effects in speaker and coax cable costing well over $500 per foot in some cases.

This is in the same bin as the fellow’s device intended to “degauss” compact disks, which are, of course, made of polycarbonate and Aluminum, both of which are non-magnetic.

Read the following bunch of BS and you will know what I mean:

http://www.stereophile.com/content/cd-demagnetizing-1



_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>