TenTec
[Top] [All Lists]

Re: [TenTec] SOTA RADIO - Bioennopower batteries

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] SOTA RADIO - Bioennopower batteries
From: "rick@dj0ip.de" <Rick@DJ0IP.de>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 18 Mar 2016 22:19:35 +0100
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
How does the amp switch from RX to TX?
I don't see an AMP KEY jack.

73 - Rick, DJ0IP
(Nr. Frankfurt, Germany)



-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Reed
Sent: Friday, March 18, 2016 10:10 PM
To: tentec@contesting.com
Subject: [TenTec] SOTA RADIO - Bioennopower batteries

Mention Ham Nation and you will get a discount too.  I ordered mine from
Buddiepole 4 or 5 years ago & they are still going strong. Cheaper at
Bioennopower!

Still have a Argonaut 515 bought new with cw & notch filter. Also the
405 amp.  Great little rig!  Got an old Argosy 525 analog also.  Easy to
work on compared to today's rigs!  Sold my Scout to buy the Argonaut V.  
The Scout had better SSB transmit audio, but Argonaut V did better on
digital & CW.  Had a 509 back in the 70s, but traded it in.  Also have the
Argonaut VI that was a beta unit turned in back in 2013.

The best QRP rig out there, in my opinion,  is  the KX3!  Had mine for 4
years and can't say enough good things about it.  The Yaesu FT-817, if you
replace the stock I.F. filter with their Collins SSB filter & add their
Collins CW filter, is not a bad little QRP rig.  It's the one I grab for
rough outdoors use.  The KX3 is a much better rig, but also little more
fragile at over 2 times the price. Use a resonant antenna, like LNR 40, 20,
10 end feed & you won't need a tuner.

I bought this little amp 4 weeks ago and really been happy with it on SSB
when most of time need little more power.  Smallest amp I have seen that
peaks 40 watts on 20 meters going to a Bird watt meter into a dummy load.
Yep, it is made in China.  Looks like designed from a ham there since it has
his call letters screen printed on circuit board, but never know if that is
just a sales thing.

https://vk2qr.wordpress.com/2014/11/25/mx-p50m-hf-amplifier-review/

Price range from $180 to $250 depending on where you buy it from. I ordered
mine from.

http://www.aliexpress.com/snapshot/7265192208.html?orderId=72336486514659

Shipping is about 2 weeks.  Only pulls little over 6 amps at 40 watts out.
It does need the 13 volts to get 40 watts, but will work at 12 volts at
reduced power out.  Love the little Lithium Iron Phosphate
(LiFePO4)  Battery that holds that 13 volts!

73,
Reed  W4JZ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>