nothing like success on the first try!
suspected a bulging cap on the power distribution board and there it was daring
me to touch it…nice round top…
the same board in the O 1, which has fresh electrolytic caps, worked fb in the
O 2 so am a happy camper.
fortunately got some of the recommend replacement electrolytic caps leftover
from repairing an older O 1 will press into service to repair the pulled board.
now if only can brighten up the dim display on the O 1 a bit more….playing with
the contrast a tad helps but still it is a bit dim.
> On Sep 4, 2016, at 9:21 AM, Fernando <n2fq@sbcglobal.net> wrote:
>
> Hello
>
> Looking at both schematics, they are the same.
>
>
> Fernando N2FQ/6
> n2fq@sbcglobal.net
>
>
>
>
>> On Sep 4, 2016, at 8:45 AM, denton sprague <denton@oregontrail.net> wrote:
>>
>> my workhorse orion 2 won’t boot up correctly…looks like will have to replace
>> the power distribution board? have an orion 1 that has new caps on the
>> board…is the board the same for both radios?
>> will put in fresh battery in the O 2 at same time….
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|