OK gurus:
As described below, I have an Orion II with old software:
2.039d / DSP 2.06b14.
1. Downloaded the 3.03x7b software.
Set the COM1 port to 56700.
Executed the update program.
2. Get screen with:
"Flash rom update file...3.03x7b"
"Please be patient ..."
"10810 line in file"
"Using serial interface"
3. Then new window with
"Error encountered"
"Communication with radio has failed.
... radio may not operate properly.
... power cycle radio ... try again."
4. Power cycled radio and try again.
Same results.
5. Fortunately radio still works fine.
Any suggestions?
73, Bob, w3idt
--
.............................
. Robert F. Teitel, W3IDT .
. .
. W3IDT@arrl.net .
. W3IDT@comcast.net .
.............................
On 2/21/2017 1:57 PM, Bob, W3IDT wrote:
Mike, Others,
1. I was bequeathed both an Orion II and an Alpha 99, and was told by
local friends that I should sell them immediately as they will soon be
worthless. I had operated both the O2 and the 99 at the SK's qth for
multi-op contests, and loved them much better than my own rigs, so I
kept / am keeping them. Need to update the O2, and who knows maybe send
it back to TT for an overhaul.
Yes, I know, no dollars direct to you yet. But I'm there in spirit.
2. Haven't figured out how the band-stacking feature works - maybe user
ignorance - but otherwise the O2's front panel seems great.
Really hope you succeed.
73, Bob, w3idt
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|