Re: [TenTec] 707 wiring

[Bob McGraw K4TAX <rmcgraw@blomand.net>]

From the original Tentec drawing;

Pin #1 is mike HIGH

Pin #2 is mike LOW

Pin #3 and pin #4 are connected direct to the PTT switch.

The shell should be used as the shield/ground.

73

Bob, K4TAX


On 10/12/2019 7:12 PM, Michael Chowning wrote:
> Here is what I found from a previous post from you by the way!
>
> 1= mic low
> 2= mic hi
> 3= ptt
> 4=common
> Shield to shell
> That is what works on mine anyway
>
> Paul K0UYA
>
> Mike, N8TTR
>
> > On Oct 12, 2019, at 5:54 PM, Paul Kraemer <elespe@lisco.com> wrote:
> >
> > A while back someone here had the wiring data for the 707 mic.
> >
> > I had a copy but can't find it now that I need it.
> >
> > Any help appreciated
> >
> > Thanks Paul K0UYA
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec