Many thanks to those who have contributed ...
The consensus was clearly that silver plating would not
make a practical difference below 30 MHz, at least in the
short term.
In any case, I have moved forward and have completed the
tuner, using the exising copper conductors, except for
some of the lower inductance coils (used primarily above
10 MHz), where I have replaced the 3 mm wire with 1/4"
tubing.
No bling!
TKS for all the good advice and see you in the contest,
George
AA7JV
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|