| To: | topband@contesting.com |
|---|---|
| Subject: | Topband: Help installing compression connectors |
| From: | Tony K1AMF <k1amf@live.com> |
| Date: | Mon, 17 Nov 2014 09:44:10 -0500 |
| List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
Anyone have any suggestions on how to install compression connectors on flooded RG6 quad shield coax with PE jacket? I'm using Belden Snap-N-Seal RG6QS compression connectors but they're nearly impossible to slip on far enough. I've tried removing the outer braid and foil and still no luck. Maybe I should be using different connectors? The coax I'm using for the beverage is Commscope F6SSEF / 4561804. Thanks, Tony/K1AMF _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Topband: Crave World Clock, Doug Renwick |
|---|---|
| Next by Date: | Re: Topband: Help installing compression connectors, Phil Duff |
| Previous by Thread: | Topband: Crave World Clock, Doug Renwick |
| Next by Thread: | Re: Topband: Help installing compression connectors, Phil Duff |
| Indexes: | [Date] [Thread] [Top] [All Lists] |