Re: Topband: Help installing compression connectors

[Jim Brown <jim@audiosystemsgroup.com>]

On Mon,11/17/2014 7:37 AM, donovanf@starpower.net wrote:
> I'm sure there other alternative techniques
> that others might share with you.
My variation on this is a ViseGrip on the connector that I twist back 
and forth onto the cable until I see the foam even with the shell. Then 
I use the tool to push the ring into the connector.
73, Jim K9YC
_________________
Topband Reflector Archives - http://www.contesting.com/_topband