Topband
[Top] [All Lists]

Re: Topband: ADC overload from MW transmitters

To: topband@contesting.com
Subject: Re: Topband: ADC overload from MW transmitters
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Sun, 18 Oct 2015 21:21:40 -0700
List-post: <topband@contesting.com">mailto:topband@contesting.com>
On Sun,10/18/2015 8:59 PM, Steve Ireland wrote:
Phil lives line of sight from the Australian Broadcasting Transmitter 
installation in the northern suburbs of Perth. There are three AM transmitters 
there which run 24 hours a day, seven days a week:
6PB at 10 kW on 585 kHz; 6RN at 20 kW on 810 kHz; and 6WF at 50 kW on 720 kHz,

That's typical of medium-size cities in the US for high power broadcasters, but major cities typically have twice as many. Both large and medium-size cities, as well as smaller ones, typically have 6-10 stations in the 5kW range, and more in the 1kW range. Chicago is typical of a large city (like New York, Boston, Los Angeles, San Francisco) -- it has 50kW on 670 kHz, 720 kHz, 780 kHz, 890 kHz, and 1,000 kHz. There's also a daytime only station with 50kW on 1160 kHz. Cincinnati is typical of smaller cities like Indianapolis, Detroit, Minneapolis, Cleveland, St Louis, and New Orleans, with 2-3 50kW stations and many smaller ones. Cincinnati 50kW stations are on 700 kHz and 1530 kHz.

I grew up in a small town in WV, with three 5 kW stations within two miles on 800 kHz, 930 kHz, and 1470 kHz.

Bottom line -- there's a lot more broadcasting in the US than in most countries.

73, Jim K9YC


_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>