Would be interested in responses to this query as well. Am planning to erect
the 4 el Hi Z with 80 ft spacing in a forested area. Trees are a mix of hard
and soft wood. Average heights are 70 ft.
Gut feel is zero impact. Have 4 SQ for TX on both 160 and 80 in woods and seem
to work just fine.
Regards,
Mark, K1RX
> On Feb 18, 2019, at 2:56 PM, Mike Fischer <mikebfischer@comcast.net> wrote:
>
> Hi all, newb to the topband 160 reflector here so thank you for any coaching
> or corrections on protocol…
>
> I live on a heavily forested (douglas firs - almost all of which are 100’+)
> piece of land.
>
> I have enough room left to put up either an SAL 30 or a 4sq of 20’ verts
> with 80’ spacing. HiZ probably
>
> Problem is regardless of which I choose, there will be at least one or two
> trees in the “infield“ and foliage around the edges.
>
> Any experience with the same or thoughts? Grateful for the coaching please
> feel free to reply direct to mikebfischer@comcast.net
>
> 73
> K7XH
>
> Sent from my iPhone
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|