Towertalk
[Top] [All Lists]

Need Advice on a tower

To: <towertalk@contesting.com>
Subject: Need Advice on a tower
From: K8DO@aol.com (K8DO@aol.com)
Date: Fri, 8 Nov 1996 15:21:22 -0500
In a message dated 96-11-07 16:05:13 EST, you write:

<< The atmosphere is corrosive, that's why we went with an aluminum tower.
 The
 aluminum tower has already failed once, in an 80 mph breeze, >>


This is right off the top of my (pointy) head and I have not taken the time
to think it through...  so, if I went off into the weeds on this one , _be
kind_  my ego is feeling rather fragile today...

3 step process
1. standard galvanized (rohn) tower and use the anti-electrolysis box that
they use for boat/ship bottoms.... check the boating magazines / boat
shops... I'm not sure what the sacrificial anode should be as the tower is
already zinc coated....
2. epoxy paint the tower after it is up... at least 2 coats.. really pickle
it...
3. leave the legs on the top section open... i.e. don't use a pointy top....
keep the rain out of the legs by putting plastic end caps over the them...
once or twice a year (or whenever the mood strikes, mon) take the plastic
caps off the legs, drop a small vinyl tube down each leg and spray ACF50
through the tube whilst pulling it back up.... ACF50 is used to corrosion
proof airplanes....  Corrosion Technologies,  1-800-638-7361


Denny

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>