Ac> The only problem I did have was that on split
Ac> tubing/hose clamp joints it reduces friction enough to make a tight
Ac> connection more difficult.
Ac> 73 de Terry KK6T ex AC6EF
Take a hint from ON4UN and shoot a pop rivet into each joint after you
clamp it. Sheet metal screws will also work but may eventually come loose.
He also puts shrink tubing over the joint. I used these ideas when I rebuilt
my 40m Yagi.
73 Bill N6CQ/3
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|