Towertalk
[Top] [All Lists]

[TowerTalk] insulated guys/stacks

To: <towertalk@contesting.com>
Subject: [TowerTalk] insulated guys/stacks
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Wed, 2 Apr 1997 19:03:20 -0500 (EST)
In a message dated 97-04-02 18:31:49 EST, rattmann@cts.com (rattmann) writes:

> Bottom line:  Within about, say, 50 feet of the tower legs I recommend guy
>  wire insulators every nine feet if you are using side-mounted yagis, alone
>  or in stacks.  Beyond about 50 feet out, I don't think it makes much
>  difference, 28 foot lengths are probably fine, or even no insulators at
all
>  are probably o.k. in those lower areas far out from the antenna (unless
you
>  also have some vertical arrays in the vicinity...but that's another
matter).
>  
      By using a nine foot segment length, you have just exceeded the
comparitive cost of Phillystran.  Use Phillystran for the first 50 feet or so
of the guys and segmented steel guys down to the ground.  Lighter and less
work to boot.

73,  Steve  K7LXC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com

<Prev in Thread] Current Thread [Next in Thread>