Towertalk
[Top] [All Lists]

[TowerTalk] Cutting EHS?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Cutting EHS?
From: sawyers@inav.net (Steve Sawyers n0yvy)
Date: Tue, 22 Apr 1997 21:01:32 -0500
For 3/16 and 1/4 I use bolt cutters. Anything bigger I use a cutting
torch. Have seen bolt cutters used up through 1/2" but takes some big
bolt cutters and some very strong arms.

BTW doing a little welding on the end of 7 strand cable will keep it all
in one piece without having to re-wrap stray strands - poorman's cable
seizing.

de n0yvy steve

Barry Kutner wrote:
> 
> Hi all - Wonder what everyone uses to cut EHS guy wire? I've tried a
> variety including a hack saw (pure torture!) to bolt cutters (put a
> nice dent in the jaws). What works best?
> 73 Barry
> 
> --
> Barry Kutner, W2UP              Internet: w2up@bellatlantic.net
> Newtown, PA         FRC         alternate: barry@w2up.wells.com
> 
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com

<Prev in Thread] Current Thread [Next in Thread>