Towertalk
[Top] [All Lists]

[TowerTalk] 1/4CCM torque limit

To: <towertalk@contesting.com>
Subject: [TowerTalk] 1/4CCM torque limit
From: dietz@texas.net (Chuck Dietz)
Date: Thu, 26 Jun 1997 05:43:17 -0500
Pete Soper wrote:
> 
> Hi Folks,
>         While putting up the first part of my tower I stripped the threads on
> one EHS cable clamp (clip) and broke another one.
--snip--
>   3. Is it likely I have defective clamps or is a 5% failure a fact of life
>      with these components?

I use clamps from an electrical supply house in Houston.  I have used
hundreds of them and I can not imagine being able to strip the threads
with my 6" handle rachet even with the clamp in a vice and using 2
hands!

Chuck, KE5FI

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>