In a message dated 97-07-13 23:31:47 EDT, nw9g@netusa1.net (Steve Narducci)
writes:
> I just aquired a used t2x just back from c.a.t.s. without a manual or the
> bolt pattern
> page. I need this for my rotor plate.
> Anyone out there in tower talk land that could scan it at it's actual size
> and
> e-mail it directly to me?
> I would greatly appriciate that and thank you in advanced....Steve....NW9G
>
You have an undrilled rotator plate? Must be homebrew.
Why don't you just call Linda at Hy-Gain and have her send you one?
She's at 402-467-5321. Tell her I said hi.
BTW, my suggestion for information/manuals/parts for manufactured
products is to go to the manufacturer first. Typically they can help you. If
they can't, then TowerTalk is a good source of additional help.
73, Steve K7LXC
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|