[Top] [All Lists]

[TowerTalk] Rohn 25 and Hazer

To: <>
Subject: [TowerTalk] Rohn 25 and Hazer
From: (Steve Weisbrod)
Date: Tue, 29 Jul 97 08:20:00 -0600
I have a 50ft Alum. Glen Marten Tower with the Hazer. It is just great!   
It is guyed only at the top. You release 2 guys to let the Hazer down or   
put it up. The guy that is not released is parallel to the beam elements   
so they clear.  On there 60ft model they use a different system that has   
guys in the middle.  The Hazer on this model runs on a track instead of   
around the tower. You may be exceeding the ratings for your tower with   
only one set of guys at the top for 60ft of rohn. I don't know I guess it   
depends on what you intend to put on it. My tower is rated at 16sqft   
@87mph. There is a lot of info on Glen Marten products at  their web site. I hope this helps.

73 Steve W8GAZ

From:  ' <>'
Sent:  Tuesday, July 29, 1997 5:49 AM
To:  steve; ''
Subject:  [TowerTalk] Rohn 25 and Hazer

I recently purchased 60' feet of Rohn 25 tower with a heavy duty Hazer.   
I'm not much of a climber the hazer will be handy. However, I'm a little
confused as to how the guys are installed on the lower part of the tower
while still allowing the hazer to traverse the tower. The previous owner   
the tower attached to his house and only guyed the top of the tower.
I would be interested in hearing from anyone who is using a hazer and   
how it is installed.
Thanks de Dave K1EPJ

FAQ on WWW:     
Administrative requests:

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>