Towertalk
[Top] [All Lists]

[TowerTalk] Rotors: Yaesu vis Hy-Gain

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rotors: Yaesu vis Hy-Gain
From: pramey@smtplink.ram.com (pramey@smtplink.ram.com)
Date: Fri, 23 Jan 98 09:29:02 EST
     I used a Ham-M your years and was happy with it.  When I replaced it I 
     went to  the Yaesu G-800SGX.  It took the wind and cold in Minnesota 
     fine.  It is now back in service about 15 miles off the coast in New 
     Jersey and still turning a Force12 C-4XL/D.
     
     Paul, WG0G/W2


______________________________ Reply Separator _________________________________
Subject: [TowerTalk] Rotors: Yaesu vis Hy-Gain
Author:  "Ted Leaf" <tleaf@hotmail.com> at smtplink-rammob
To: <towertalk@contesting.com>
Date:    1/23/98 6:02 AM


In the next few weeks, I am going to purchase a rotor.
     
Del KL7HF, has started a discussion with the failure in his Yaesu 
control box.
     
I have my eye on the Yaesu G-800S, because I like the compass dial.
     
I believe the Hy-Gain CD 45II is good, but it does't have the compass 
dial.
     
Both are priced about the same, but Yaesu claims a higher wind load 
rating and has control cable jacks.
     
Hope you can help me decide.
     
73, Aloha
Ted Leaf, K6HI
Kona, Hawaii
<tleaf@hotmail.com>
     
     
______________________________________________________ 
Get Your Private, Free Email at http://www.hotmail.com
     
--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html 
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com 
Problems:                 owner-towertalk@contesting.com 
Search:                   http://www.contesting.com/km9p/search


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>