Towertalk
[Top] [All Lists]

[TowerTalk] Thrust Bearing set screw and Loctite

To: <towertalk@contesting.com>
Subject: [TowerTalk] Thrust Bearing set screw and Loctite
From: ni6w@yagistress.minden.nv.us (Kurt Andress)
Date: Wed, 29 Jul 1998 17:41:35 -0700


Stan Griffiths wrote:

> I received 5 new TB3s today in a shipment from Rohn and I noticed that once
> they had the bearing set screw in place, they hit the threads in the
> aluminum portion of the bearing with a punch in an attempt to keep the set
> screw in place.  This may work just fine . . .
>
> Stan  w7ni@teleport.com

 Stan,
Thanks for the info. This should work fine. Maybe, the one you had problems 
with in
the past was missed during manufacture. I guess the word for the day is for all 
who
get one of these bearing to check it to ensure that it has been punched.
73, Kurt

--
YagiStress - The Ultimate Software for Yagi Mechanical Design
Visit http://www.freeyellow.com/members3/yagistress



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>