Towertalk
[Top] [All Lists]

[TowerTalk] Info to motorize my tower

To: <towertalk@contesting.com>
Subject: [TowerTalk] Info to motorize my tower
From: d.dimitry@mci2000.com (d.dimitry)
Date: Fri, 02 Oct 1998 15:17:27 -0500
Dear Potential Customer(s):

Thanks for expressing your concerns about crank-up towers and cables.
I not only sell various sizes and grades of stainless cable, but we also
install them as a standard item on all our crank-up, telescoping towers.  We
also have stainless hardware, such as pulley sheaves, included.  (Isn't
America a great place to live and do business!)
Am I getting to commercial now?
Well, just contact me for further info.  Tnx  : )

DDimitry@heightstowers.com

-----Original Message-----
From: JSheinb785@aol.com <JSheinb785@aol.com>
To: Rmintz@frontiernet.net <Rmintz@frontiernet.net>
Cc: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Friday, October 02, 1998 7:50 AM
Subject: Re: [TowerTalk] Info to motorize my tower


>
>In a message dated 10/1/98 4:44:21 PM Pacific Daylight Time,
>Rmintz@frontiernet.net writes:
>
><< Rmintz@frontiernet.net  >>
>I also have an HDX555 Tristao (US Towers now) with MDP750 motorization
>purchased from Lou Tristao in 1981.  I asked him for stainless cable, but
he
>said he'd NEVER had a cable failure.  He mustn't have sold any on the
>corrosive Gulf Coast of Texas, About 3 or 4 years ago I went out to raise
the
>tower (it had been lowered due to high winds) & when it got to the top the
>cable broke & DOWN came the tower. It ruined the tower, & the 3 beams are
>"inverted" beams.  When I called US Tower & told them what happened I got
an
>ARROGANT answer: : We won't sell you anything but the cable and it's
$89.95.
>No offer of any help  They said that you're supposed to change the cable
>everey 3 or 4 years,  I replied that no instructions came with the tower to
>that effect & they said "We still don't send any".
>Can you imagine carrying on a business with such an attitude.
>So, after all the above, I haven't replaced my tower even tho' I can't
raise
>it any more,
>but the bent antennas still work in spite of broken off outer elements.
But
>the motorized part is going to waste.  I'm reluctant to buy another US
Tower
>but don't know if others would fit on my base.  I'd advise you to put
>stainless cable on your tower. Use the hand crank!
>73,  Joe,  WD5FHG  Corpus Christi Texas
>
>--
>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>