This is a multi-part message in MIME format.
--------------7CA82E6110B3DADA6E4A6558
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Yesterday I worked a UA0AZ, zone 18, on 30M. I wasa surprised by the
contact since I had my C3 in line and not thge G5RV I always use.
Needless to say I received a 579 from ALEX and after the contact I
realized the error I had made. Goiong to the G5RV caused a severe
attenuation to Alex's signal and switching from the C3 to the G5RV did
indocate a much stronger s meter reading like 4 s units. I assume that
the C3 was functioning adversely but because of directivity as compared
to my G5RV was able to pull Alex in better. Has anyone out there used
the C3 on 30M with any success??
I am interested in comments concerning this.
Thanks ALL
de AL /NA1I
--------------7CA82E6110B3DADA6E4A6558
Content-Type: text/x-vcard; charset=us-ascii; name="vcard.vcf"
Content-Description: Card for bijou bubba
Content-Disposition: attachment; filename="vcard.vcf"
Content-Transfer-Encoding: 7bit
begin: vcard
fn: bijou bubba
n: ;bijou bubba
email;internet: al.jaras@meriden.k12.ct.us
x-mozilla-cpt: ;3856
x-mozilla-html: FALSE
version: 2.1
end: vcard
--------------7CA82E6110B3DADA6E4A6558--
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|