Towertalk
[Top] [All Lists]

[TowerTalk] Loose Rotator Bolts

To: <towertalk@contesting.com>
Subject: [TowerTalk] Loose Rotator Bolts
From: wf3h@enter.net (bob puharic)
Date: Sun, 18 Oct 1998 22:47:26 +0000


Matt T Powell wrote:

> Hi,
>     Has anyone experienced rotator / plate  mounting bolts loosening up,
> to the point of falling out ?  I have had 2 cases of this happening,
> which were discovered this weekend.
>
>      Both rotators were T2X's. One turns a 2 element 40 meter yagi and
> the other turns a stack of monobanders on 10-15-20 meters. Each rotator
> was installed this spring. All mounting bolts had 1 flat and 1 "split "
> lock washer on them. All were installed with a small amount of grease on
> the threads.
>
>     Maybe a "star" washer would correct the problem ? Thoughts or
> comments.

you bet...have seen this on my own ham iv rotator...one bolt was, literally,
hanging on by a thread.! guess you gotta tighten 'em up occasionally.
probably gets loose from rotator torque.


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>