Hi James,
I was always told that when you bypass something to keep the leads as short
as possible.
I, myself, would solder the diodes and caps right to the coils. Will be
interesting to
see what others have to say.
73 Jim K7SLI
> Question: Is it important that the caps and diodes be soldered
> directly to
> the relay coils or can they be mounted on a small circuit board and
> connected to the relays via wires?
>
> thanks &
> 73 James / k1sd
> Rhode Island
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|