Towertalk
[Top] [All Lists]

[TowerTalk] How do you remove guys to walk a beam up Rohn25?

To: <towertalk@contesting.com>
Subject: [TowerTalk] How do you remove guys to walk a beam up Rohn25?
From: wa6znm@jps.net (James Sawyer)
Date: Sun, 11 Apr 1999 20:05:58 -0700
Be safe man and use a crane.   DO NOT try removing the guys...... Its not
worth it...

Jim


At 06:32 PM 4/11/99 -0400, Tom Wagner wrote:
>
>I just bought a Cushcraft X9, and have been thinking about
>how to raise it.  Tramming is out, I just don't have enough room.
>I had resigned myself to building it on the tower -- a prospect
>that took another X9 owner 6 hours.  Ugh!  The X9 has a 
>28' boom, 9 elements and the longest element is 36'
>
>I was browsing KC1XX's web site and found an idea that
>intrigues me.  He raised W4AN's new 40m beam by walking
>it up the tower and detaching/reattaching guys as he went.
>
>Has anyone done this?  Here is how I would envision it:
>Element tips pointing up, walk the beam 
>(with gin pole assistance of course) to
>the first guy level.  Attach a temporary guy wire just below the 
>boom and tighten a come-along until the first torque bracket bolt
>comes out easily.  Move the antenna past the first guy level, and
>reattach the old guy.  Remove the temporary guy and move to
>the second guy level.  Repeat the procedure at each guy level.
>
>Questions:
>
>1.  Is an ordinary come-along safe for this purpose?  If it gives way,
>the tower will be subject to unbalanced forces and could collapse.
>Should the guys be loosened at each level, before using this 
>approach?  Would two temporary guys be better than one?
>
>2.  My tower is 75' of Rohn 25 guyed at 3 levels with 1/4" EHS,
>somewhat over-guyed, but well within spec for downward stress.
>
>3.  Does this seem safer than spending 6 hours on the tower?
>It sure is less work.
>
>Has anyone used this approach.  I'd like to do this safely, but 
>without 6 back-breaking hours at the top of the tower.  Even 
>if it took longer than 6 hours to do it right, it would be better
>than building it at the top.  It would also be better, in that
>I could test it at the first guy level for proper operation and
>correct problems much more easily than using the other
>approach.
>
>Please post replies to the reflector.
>
>Tom Wagner, N1MM
>
>
>--
>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>
>

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] How do you remove guys to walk a beam up Rohn25?, James Sawyer <=