Towertalk
[Top] [All Lists]

[TowerTalk] Modeling LPDAs from LPCAD

To: <towertalk@contesting.com>
Subject: [TowerTalk] Modeling LPDAs from LPCAD
From: cebik@utkux.utcc.utk.edu (L. B. Cebik)
Date: Sun, 26 Sep 1999 10:01:25 -0400 (EDT)
I have just added a note (in the modeling section of the index) on
translating LPDA designs from LPCAD (Roger Cox's very popular program)
into NEC models.  From some correpondence and reading over the last year
or so, I am not sure that maximum care is always being used--hence, a
little note on some modeling requirements in NEC to be observed.
Obviously, this is a note of limited interest, but I hope it is useful to
someone.

-73-

LB, W4RNL

L. B. Cebik, W4RNL         /\  /\     *   /  /    /    Tel: (423) 938-6335
1434 High Mesa Drive      /  \/  \/\     ----/\---    
Knoxville, Tennessee     /\   \   \ \   /  / || /     http://www.cebik.com
37938-4443     USA      /  \   \   \ \       ||      e-mail: cebik@utk.edu


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Modeling LPDAs from LPCAD, L. B. Cebik <=