Towertalk
[Top] [All Lists]

No subject

To: <towertalk@contesting.com>
Subject: No subject
From: n7cl@mmsi.com (Eric Gustafson)
Date: Thu, 30 Sep 1999 12:04:47 -0700
In-reply-to: <19990930160141.14592.cpmta@c008.sfo.cp.net> (message from eric
        on 30 Sep 1999 09:01:41 -0700)
Subject: Re: [TowerTalk] Easy/Affordable Drawing Program?
Reply-to: n7cl@mmsi.com
References:  <19990930160141.14592.cpmta@c008.sfo.cp.net>
--text follows this line--

Hi Eric,

Go to:

http://www.imsisoft.com/

and download their V5 version of the basic "TurboCad" program.  I
have been using the V3.01 for a few years now and it is a very
useful tool.  I paid $29 for the V3 program as a cheap basic
drafting package when they had gone to version 4.  Now I notice
that they are above version 6 and have V5 on their website as a
free download.

If you can get the manual by paying them the $29, do it.  It is
the best piece of CAD tool documentation I have ever seen.  It is
actually somewhere between useful and essential.  At the very
least, the manual will grossly shorten your learning curve for a
new tool.

73, Eric  N7CL



To: <towertalk@contesting.com>
>Date: 30 Sep 1999 09:01:41 -0700
>From: eric <wd3q@pop.erols.com>
>
>I'm looking for a affordable, easy-to-use drawing or drafting
>program to lay out my property for antenna placement.
>
>Any recommendations are appreciated! 
>
>Thanks in advance,
>
>Eric W3DQ
>Washington, DC
>wd3q@erols.com

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>