........<snip>
> Good grief, no need to ever tighten the hardware so much that the tubes
> are deformed. If you do, you have probably exceeded the allowable
> percentage of yield values on the bolts.
.......<snip>
> N5RP
>
>
Actually, Rohn specifically states to tighten the bolts until the tubes
deform.
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|