Radioshack sells cable labels. I use them a lot on my coax cables and
my servo's leads on my remote control planes.
It looks like a piece of scotch tape with a white end that you can write
on. When your done wrapping it on, the written area is covered by tape
so the ink is protected.
GALE STEWARD wrote:
> I recently read that a good way to mark coax cables
> (think it was at W4AN's station) used different
> colored tape applied to the cables to show the
> different bands, etc. I've been looking but have yet
> to find a "set" of tape with more than three colors.
> Since one of the colors was black, there were only two
> colors available to use on black coax! It would be
> nice to find a set with nine colors like the resistor
> color code. Anyone ever run across something like
> this?
>
> 73, Stew K3ND
>
> __________________________________________________
> Get personalized email addresses from Yahoo! Mail - only $35
> a year! http://personal.mail.yahoo.com/
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
--
73,
Richard Thorne
ARS N5ZC (ex KA2DSY, N2BHP, WB5M)
Remote Control Airplanes: AMA# 657062
http://www.tcac.net/~rthorne/
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|