Towertalk
[Top] [All Lists]

[TowerTalk] Rotator Control South Center Help!

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rotator Control South Center Help!
From: n3rr@erols.com (Bill Hider)
Date: Fri, 4 May 2001 13:38:31 +0100
Joe,

Here is what I think you need:

Define: The desired actual heading of the antenna = X
Define: The heading to be output from the software to the rotor meter
movement = Y

If 180 < = X < = 360, then Y = X - 180
If 0 < = X < = 180, then Y = X + 180

Depending on your software, you may need to equate 360 = 0 when X = 360

Bill, N3RR

----- Original Message -----
From: <k0bx@qsl.net>
To: <towertalk@contesting.com>
Sent: Friday, May 04, 2001 2:15 PM
Subject: [TowerTalk] Rotator Control South Center Help!


> I built and installed a Rotor-EZ circuit box in my Ham III rotor box.
Works fine.  I then wrote a small Visual Basic program to control the rotor
from the desktop.  I then put the software on my webpage
http://www.qsl.net/k0bx/rotor.htm  in case anyone else would like to play
with it.  Then last night I received a e-mail from a VE ham who said that he
put the Rotor-EZ in his control box but that living up north he has the
South Center Scale and my rotor control program points the wrong way.
>
> So what I need is a equation that will translate the normal headings into
heading for a south center scale of a ham IV rotor?   Anyone got any ideas??
>
> Thanks Joe
>
>
>
> k0bx@qsl.net
> http://www.qsl.net/k0bx
> Find the best deals on the web at AltaVista Shopping!
> http://www.shopping.altavista.com
>
> List Sponsor:  ChampionRadio.com - Trylon self-supporting towers,
> safety equipment, rigging gear, LOOS tension guages & more!
> http://www.championradio.com
>
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
>


List Sponsor:  ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>