Towertalk
[Top] [All Lists]

[TowerTalk] Galvanized Hardware

To: <towertalk@contesting.com>
Subject: [TowerTalk] Galvanized Hardware
From: hasben@ix.netcom.com (Richard Hassell-Bennett)
Date: Mon, 11 Jun 2001 07:56:31 -0500
Try Stan

W7NI@easystreet.com

de

Richard K0XG        www.qth.com/k0xg  for BIG tower hardware and fixtures


----- Original Message -----
From: "Mike Gilmer - N2MG" <n2mg@contesting.com>
To: <towertalk@contesting.com>
Sent: Monday, June 11, 2001 7:33 AM
Subject: [TowerTalk] Galvanized Hardware


> While we're on the topic of hardware - is there a decent source for
Rohn-like galvanized hardware other than Rohn itself?
>
> I'd especially like to get my hands on some of the galvanized U-bolts that
are used around tower legs to hold some custom side mounts, but am also
interested in one-off bolts/nuts for things like guy assemblies, etc.
>
> 73 Mike N2MG
>
> ________________________________________________
> PeoplePC:  It's for people. And it's just smart.
> http://www.peoplepc.com
>
> List Sponsor: Are you thinking about installing a tower this summer? Call
us
> for information on our fabulous Trylon Titan self-supporting towers - up
to
> 96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
> www.ChampionRadio.com</A>
>
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
>


List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>