Towertalk
[Top] [All Lists]

[TowerTalk] Ginpole for 20 foot sections

To: <towertalk@contesting.com>
Subject: [TowerTalk] Ginpole for 20 foot sections
From: rthorne@tcac.net (Richard Thorne)
Date: Mon, 11 Jun 2001 07:47:12 -0500
Hi Stan:

I think its called a crane :-).  I've helped put up several 25g and 45g towers 
in my ham
career.  The 45g sections usually required 2 if not 3 people to pull the 
section up
safely.  I'm sure some sort of winch would be required to pull up 420lbs 
assuming you
could find/manufacture a gin pole that would handle it.

Stan Stockton wrote:

> About a decade ago I acquired a little broadcast tower and am now wanting to
> put it up.  There are eight sections, 20 foot long each, about 18 inches on
> a side, solid rod legs about 1.5 inches in diameter, and each section weighs
> 420 pounds.  Any ideas on the construction of a gin pole that would handle
> this thing would be appreciated.
>
> Stan, K5GO
>
> List Sponsor: Are you thinking about installing a tower this summer? Call us
> for information on our fabulous Trylon Titan self-supporting towers - up to
> 96-feet for less than $2000! at 888-833-3104 <A 
> HREF="http://www.ChampionRadio.com";>
> www.ChampionRadio.com</A>
>
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com

--
Richard Thorne
Advo Companies, Inc.
806-342-0600



List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>