Copper roofing is all the rage for commercial buildings and some high-end
private residences, so my local scrap metal dealer always has a bunch of
leftover pieces on hand from the commercial roofers, who sell him all their
copper roofing scraps. I buy it for $1 a pound, and 5 pounds is a lot of
copper roofing, in pieces 6"-12" wide and 3 to 4 feet long. Cutting it with
tin snips works fine, but will leave an edge you could shave with, so
getting it roller-cut into 1" strips or whatever at a sheetmetal shop might
be a good idea. I just clamped the strips between two pieces of wood in a
vise and cleaned the dangerous edges up with a file. Took a few minutes, but
no big deal. That was one of the several times I wished I had a power
nibbler. I saw a 100' roll of 2" at HamCom in Dallas, the guy wanted $150
for it. Sheesh.
73, Jerry W5KP
----- Original Message -----
From: Jerry Keller <dxdog@rcn.com>
To: Mike Wapner <MWapner@Vetronix.com>; <towertalk@contesting.com>
Sent: Monday, June 18, 2001 7:52 PM
Subject: Re: [TowerTalk] Braided Ground Strapping
> If you decide to use solid copper strap instead of braid, you can get some
> nice flat solid copper by slicing a piece of copper water pipe lengthwise
> and flattening it out.... I've used a Dremel tool with a rotary blade, but
> there are other ways.... a little work, but in some locations it's faster
> and easier than looking for a local strap source. GL...Jerry K3MGT
>
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|