Towertalk
[Top] [All Lists]

[TowerTalk] How to raise mast?

To: <towertalk@contesting.com>
Subject: [TowerTalk] How to raise mast?
From: w0hh@msn.com (Tom Champlin)
Date: Tue, 10 Jul 2001 15:00:11 -0500
Bob,

I cut several pieces of Unistrut, available at Lowe's, etc. I then drilled
holes in them  and used muffler clamps to bolt them to the upper mast. I
then could  easily climb above the X9 up to where I wanted to place the boom
truss clamp.
Of course, I wear a safety belt and lanyard.
As with any tower work, there is a certain element of danger with this. Be
careful.

73, Tom W0HH


List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>