On 7/12/01 8:34 PM, Eugene Jensen at eugenejensen@nyc.rr.com wrote:
>I have located 1/4 wall 4130N mast in Pa and don't want to go thought the
>heart burn of having it galvanized. I have some two part epoxy PPG
>industrial paint that left over from a HV switchgear building project that 3
>years later looks like the day it was painted.
How did you paint the INSIDE of the mast?
>Any thought on the doing it this way because I seem to remember powder
>coating was another way of doing it. Tx Gene K2QWD
Powder coating is one of the toughest finishes you can put on steel.
Bill Coleman, AA4LR, PP-ASEL Mail: aa4lr@arrl.net
Quote: "Not within a thousand years will man ever fly!"
-- Wilbur Wright, 1901
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|