Towertalk
[Top] [All Lists]

[TowerTalk] Where to find rope?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Where to find rope?
From: Roger Borowski" <K9RB@arrl.net (Roger Borowski)
Date: Fri, 9 Nov 2001 13:58:37 -0500
 Try; http://www.newrivernets.com/  they are a commercial Rope dealer who
has typically 600 ft. spools.
Prices are nearly impossible to beat also. 73, -=Rog-K9RB=-


----- Original Message -----
From: Mike Gilmer - N2MG <n2mg@contesting.com>
To: <towertalk@contesting.com>
Sent: Friday, November 09, 2001 1:38 PM
Subject: [TowerTalk] Where to find rope?


>
> I'm looking to purchase 500 feet of 7/16" or 1/2" rope to use with a
ginpole (for the obvious purposes). Home Depot for example can sell me a
300-foot length but that's it.  I'll buy two if I have to...
>
> Any suggestions?
>
> Can anyone tell me who has taken over the "rope (K3KNH was it?) guy"
business?
>
> Thanks,
> Mike
> n2mg@contesting.com
>
> ________________________________________________
> PeoplePC:  It's for people. And it's just smart.
> http://www.peoplepc.com
>
> List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
> Trylon Titan towers, coax, hardline and more. Also check out our self
> supporting towers up to 100 feet for under $1500!!
http://www.anwireless.com
>
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
>
>



List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>