Towertalk
[Top] [All Lists]

[TowerTalk] Ham IV rotor control box

To: <towertalk@contesting.com>
Subject: [TowerTalk] Ham IV rotor control box
From: n2mg@contesting.com (Mike Gilmer - N2MG)
Date: 28 Nov 2001 19:43:40 -0800
It may not be a typo at all, but an unforgivable 
mistake.  It is NEVER a good idea to publish technical 
information with values like ".4".

It should always be written with a leading zero as 
in "0.4".

They teach you that in Engineering Drawing 101.

Shame on them!

73 Mike N2MG

On Wed, 28 November 2001, "Dan Evans" wrote:

> 
> 
> Many thanks Tom & All,
> 
> It would seem that this manual has a slight, but important, typo!  Looks
> like it may be time to let my friend in on the good/bad news.
> 
> The good news is there doesn't seem to be anything wrong with the control
> box...
> 
> The bad news is there doesn't seem to be anything wrong with the control
> box...
> 
> 73 & thanks again,
> Dan

________________________________________________
PeoplePC:  It's for people. And it's just smart. 
http://www.peoplepc.com 

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>