Not if you have a pipe cutter.
73 Gene K2QWD
-----Original Message-----
From: towertalk-admin@contesting.com
[mailto:towertalk-admin@contesting.com] On Behalf Of Bruce Makas
Sent: Monday, July 22, 2002 7:12 PM
To: Towertalk submital
Subject: [Towertalk] cutting a MAST
All of this talk about cutting plate got me thinking about a 20 foot
steel
thick wall 2" OD antenna mast that I have in the garage. I need to cut
it
down to two10's. The guy at the hardware store suggested that I rent a
"chop
saw." Is this the best way to do it?
73, Bruce
_______________________________________________
Self Supporting Towers, Wireless Weather Stations, see web site:
http://www.mscomputer.com
Call 888-333-9041 to place your order, mention you saw this ad and take
an additional 5 percent off
any weather station price.
_______________________________________________
Towertalk mailing list
Towertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|