[Top] [All Lists]

[Towertalk] Handling plexiglass

To: <>
Subject: [Towertalk] Handling plexiglass
From: (Guy Olinger, K2AV)
Date: Sat, 14 Sep 2002 17:16:39 -0400
Stuff made out of Teflon sheet, which shows up regularly on EBay. I'm
talking about 3/8, 3/4 inch thick teflon sheet and relatively easy to
cut, drill, etc.

It should be stiffened with metal brackets, etc at the edges, but
definitely good stuff for homebrewing amps, et al.

----- Original Message -----
From: "Mark Beckwith" <>
To: <>
Sent: Saturday, September 14, 2002 3:42 PM
Subject: [Towertalk] Handling plexiglass

> I need to cut and drill plexiglass.  I will be making custom
insulators for
> mounting matching network components (big air-variable capacitors)
> assorted chasses.
> I have a dim recollection of trying this once when I was a dumb kid
and just
> making a big mess and ruining all the plexiglass.  What tips do you
> ones offer for cutting and drilling plexiglass.
> If anyone has a better (i.e. easier) idea for mounting these big
> things (besides plexiglass) I would be happy to know it.
> Mark, N5OT
> _______________________________________________
> Self Supporting Towers, Wireless Weather Stations, see web site:
> Call 888-333-9041 to place your order, mention you saw this ad and
take an additional 5 percent off
> any weather station price.
> _______________________________________________
> Towertalk mailing list

<Prev in Thread] Current Thread [Next in Thread>