Last week, someone pointed out that the drawing on a Glen Martin web page
shows the cable clamps incorrectly positioned (ie: backwards). I sent an
e-mail to Glan Martin informing them about their error.
Below is what I received back from them. Interesting.....
73,
Jon
NA9D
-------------------------------------
Jon Ogden
NA9D (ex: KE9NA)
Citizen of the People's Democratic Republik of Illinois
Life Member: ARRL, NRA
Member: AMSAT, DXCC
http://www.qsl.net/na9d
"A life lived in fear is a life half lived."
----------
From: "Beau Aero" <beauaero@glenmartin.com>
Reply-To: <beauaero@glenmartin.com>
To: <towertalk@contesting.com>
Date: Mon, 11 Nov 2002 10:32:14 -0600
To: <na9d@speakeasy.net>
Subject: Incorrect Drawing
Sir:
Thank you for your comments.
You might be surprised to find out that the graphic on the page you listed
is correct.
The graphic listed on this page is for Kevlar Cable. Kevlar Cable is very
different from conventional Steel Cable. It should be installed using the
diagram presented.
Steel cable, on the other hand, should be installed as you said, "Never
saddle a dead horse."
Best Regards,
Beau Aero
Advertising/Marketing Department
Glen Martin Engineering, Inc.
13620 Old Hwy 40
Boonville, MO 65233
(660) 882-2734
http://www.glenmartin.com
-----Original Message-----
From: Jon Ogden [mailto:na9d@speakeasy.net]
Sent: Thursday, November 07, 2002 6:37 AM
To: info@glenmartin.com
Subject: Incorrect Drawing
Hello,
Your drawing of guy wire and cable clamps on:
http://www.glenmartin.com/catalog/page18.html
is wrong. You show the saddle of the clamp on the dead end of the guy line.
That is not the correct way to do it. Everyone knows you should "Never
saddle a dead horse." However, there will be hams who are not so educated
who will follow your picture because they trust what you say.
The drawing is just plain wrong and could possibly create a hazardous
situation.
You may want to look into correcting it.
73,
Jon
NA9D
-------------------------------------
Jon Ogden
NA9D (ex: KE9NA)
Citizen of the People's Democratic Republik of Illinois
Life Member: ARRL, NRA
Member: AMSAT, DXCC
http://www.qsl.net/na9d
"A life lived in fear is a life half lived."
|