Hi all:
Glenn, we had a problem with a Florida station. What we found to work pretty
good was : take antenna apart. Next clean antenna with # 1 steel wool. Next
wash with lacquer thinner. Over wash to be sure steel wool is removed.
Assemble antenna using a liberal coat of Nolox electrical connection
compound at the joints used for copper to aluminum connections, different
names and brands, found at all electrical suppliers. Then apply a two part,
heavy coat application of clear epoxy type paint. This has worked for us for
14 years on the Gulf coast.
I hope this helps,
Bill Wall KC4UZ @ Antenna Mart
----- Original Message -----
From: "Glenn Little" <glittle@awod.com>
To: <towertalk@contesting.com>
Sent: Thursday, November 14, 2002 12:16 AM
Subject: [Towertalk] antenna corrosion
> The radio club that I belong to has a radio room on a museum ship. This is
> parked in the harbor where the antennas are constantly exposed to salt
air.
> One of the antennas that we have is a butternut HF6V. Are there any
> recommendations on how to minimize the corrosion to the aluminum and to
> reduce the aluminum to stainless bonding?
>
> Any help appreciated. We have one antenna that has failed and would like
to
> prolong the life of the other.
>
> 73
> Glenn
>
>
> --------------------------------------------------------------------------
-
> Glenn Little glittle@awod.com QCWA LM 28417
> Amateur Callsign: WB4UIV wb4uiv@amsat.org AMSAT LM 2178
> QTH: Goose Creek, SC USA (EM92xx) ARRL TAPR
> --------------------------------------------------------------------------
-
>
>
> _______________________________________________
> AN Wireless Self Supporting Towers at discounted prices,
> See http://www.mscomputer.com
>
> Wireless Weather Stations now $349.95. Call Toll Free,
> 888-333-9041 for additional information.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
|