Towertalk
[Top] [All Lists]

[Towertalk] tower joint Conductivity ???

To: <towertalk@contesting.com>
Subject: [Towertalk] tower joint Conductivity ???
From: n4kg@juno.com (n4kg@juno.com)
Date: Tue, 19 Nov 2002 09:04:01 -0600
I admit TowerLube sounds like a good idea.

OTOH, I've used Lithium Grease from the Auto Department
at K-Mart for all of my tower joints and used 3 different
towers as shunt fed verticals or elevated GP antennas
and they work just fine.  (160M DXCC = 250)

If your tower us already up I definitely would NOT
take it down just to add some (conductive) grease !

Tom  N4KG

On Tue, 19 Nov 2002 06:39:09 -0600 Jon Ogden <na9d@speakeasy.net> writes:
> on 11/19/02 2:58 AM, xppq at xppq@pyramid.net wrote:
> 
> > need quick answer - I am SURE this
> > has been dealt with many times on
> > this reflector
> > 
> > Given a Tower of Rohn 45 - to be shunt
> > fed on Low bands -  Is it NECESSARY
> > to run WIRES top to bottom OR is the
> > conductivity at the tower joints good enough
> > to perform well as VERTICAL radiator ??
> > 
> > Should I use conductive grease?
> 
> Get yourself some TowerLube.  It's made by the same people who make 
> the TowerJack.  It's a conductive grease and it will help your sections

> go together with little to no effort.  I was amazed at how easily my 
> tower went together with it.
> 
> I would not trust the conductivity of the tower joints w/o something 
> like it.
> 
> 73,
> 
> Jon
> NA9D
> 

________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com

<Prev in Thread] Current Thread [Next in Thread>