Towertalk
[Top] [All Lists]

[Towertalk] Climbing Masts

To: <towertalk@contesting.com>
Subject: [Towertalk] Climbing Masts
From: spelunk.sueno@prodigy.net (EUGENE SMAR)
Date: Tue, 26 Nov 2002 17:39:09 -0500
TT:

     For your consideration and comments.  When one climbs a mast, the
climber's weight adds to the weight of the mast, antennas, feedlines, etc.
These weights are all supported by the rotator mounting plate inside the
tower top.  I suggest that mast climbers ought to ensure that the top
bearing is properly utilized to provide additional support.  By this I do
NOT mean relying on the set screw(s) on the top bearing, but rather relying
on a clamp of some sort to fit around the mast and to sit right on top of
the bearing collar.  Ideally, I would suggest that a third mounting plate,
intermediate between the bearing and rotator plates, be used, along with a
second clamp set on the mast, to provide yet even more support to the
combined mast/man/antenna system.

     My Trylon's shelf support angles are rated, per Trylon, to support 300
pounds each.  My CM mast weighs 110 pounds by itself; add the antenna and
coax weights (about 90 pounds, I rekon), and I'm up to 200 pounds on the
rotator shelf alone.

    In my installation I used two face-to-face muffler clamps and carriage
bolts to go around the mast right on top of the top bearing.  (I had to cut
a piece of the ears off each clamp to they wouldn't touch when installed.)
So the weight of the mast assembly is positively supported by two Trylon
shelves.  If I were to climb my mast (not likely in this lifetime), I'd
install a second clamp set to rest on the second shelf, between the top and
rotator shelves, to provide additional support, or 900 pounds total (300# X
3 shelves.)  Adding my 200 pounds to the 200 pounds of mast system weight
doesn't eat into much of the safety factor this way.  (And no - 600 pounds
of support from two plates is NOT enough IMHO.  Especially since the second
clamp set costs $4, even in Wa$hington, D.C.)

73 de
Gene Smar  AD3F
P.S.  The muffler clamp idea is from K7NV.
-----Original Message-----
From: n6kj <kelly@thejohnsons.ws>
To: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Tuesday, November 26, 2002 3:38 PM
Subject: [Towertalk] Climbing Masts


>I've seen several towers with climbable masts on top.  The masts had foot
>pegs of some kind on them.  How is this done?  Where do you get the pegs or
>masts with pegs already installed?
>
>Kelly Johnson
>N6KJ
>_______________________________________________
>AN Wireless Self Supporting Towers at discounted prices,
>See http://www.mscomputer.com
>
>Wireless Weather Stations now $349.95. Call Toll Free,
>888-333-9041 for additional information.
>_______________________________________________
>Towertalk mailing list
>Towertalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk


<Prev in Thread] Current Thread [Next in Thread>